Description & Uses:
Water base high quality matt Acrylic paint.
Used for interior and exterior surfaces.
High resistance for weather conditions (humidity – rains – UV rays - …….)        
Characterized by bright white, good hiding power and excellent spreading rate.  
Can be applied on cement, gypsum and masonry surfaces after suitable preparation.
Conforming to Egyptian standard specification 1539 for exterior paints.
water base, Environmentally friend
Description & Uses:
Water base high quality matt Acrylic paint.
Used for interior and exterior surfaces.
High resistance for weather conditions (humidity – rains – UV rays - …….)         
Characterized by bright white, good hiding power and excellent spreading rate. 
Can be applied on cement, gypsum and masonry surfaces after suitable preparation.
Conforming to Egyptian standard specification 1539 for exterior paints.
water base, Environmentally friend
Technical properties:
Final shape: Matt – Smooth
Color: white – suitable for tinting
Density: 1.6 ± 0.02
Viscosity: 110 – 115 KU
Solid content by volume: 47 ± 2
Wash ability:  washable - more than 10000 cycle
Drying time: initial drying 20 – 30 min
                        Recoat 2 – 3 hrs.
Direction for use:
Surface must be clean and free form oil, grease and dust.
The surface to be painted must be cohesive and free from disinfection or peeling.
To get the better results, make one coat from HANZ SEALER W to increase the adhesion.
Dilute with water 15 – 20% for first coat and 10 – 15 % for second coat.
Leave the surface for 2 – 3 hours before recoating.
Application tools:
Brush – Roller – Spray gun.
Spreading rate: 12-14 M2 /Liter
Storage:  18 Month in the original pack with the suitable storage condition.
Please refer to the Material safety data sheet.

Technical properties:
Final shape: Matt – Smooth
Color: white – suitable for tinting
Density: 1.6 ± 0.02
Viscosity: 110 – 115 KU
Solid content by volume: 47 ± 2
Wash ability:  washable - more than 10000 cycle
Drying time: initial drying 20 – 30 min
                        Recoat 2 – 3 hrs.
Direction for use:
Surface must be clean and free form oil, grease and dust.
The surface to be painted must be cohesive and free from disinfection or peeling.
To get the better results, make one coat from HANZ SEALER W to increase the adhesion.
Dilute with water 15 – 20% for first coat and 10 – 15 % for second coat.
Leave the surface for 2 – 3 hours before recoating.
Application tools:
Brush – Roller – Spray gun.
Spreading rate: 12-14 M2 /Liter
Storage:  18 Month in the original pack with the suitable storage condition.
Please refer to the Material safety data sheet.