Cambra Putty
Cambra Putty

Description & Uses:
Water base interior putty, ready for use.
Suitable for interior surfaces.
Characterize by ease of application and ease of sanding.
Suitable for surface preparation for interior surfaces and ceiling.
Water base -Environmentally friend
Technical properties:
Color: white
Density: 1.81 ± 0.02
Viscosity: 300,000 – 350,0000 CP
Solid content by volume: 52 ± 2
Drying time: initial drying 20 – 30 min
                        Recoat 3 – 4 hrs.
Direction for use:
Surface must be clean and free form oil, grease and dust.
The surface to be painted must be cohesive and free from disinfection or peeling.
To get the best results, make one coat from HANZ SEALER W to increase the adhesion.
Applied it by putty knife without dilution.
Leave the surface for 2 – 3 hours before recoating.
Make a soft sanding for putty surface before paint the next layer.
It is better to apply on coat form HANZ SEALER on the putty surface to decrease the consumption rate of the paint layers.
Application tools:
Putty knife
Spreading rate:  0.5 - 1 M2/kg
18 Month in the original pack with the suitable storage condition.
Please refer to the Material safety data sheet.